Polyurethane Foam Resin for Pipe Insulation System House White Component

• Customization: Available
• CAS No.: Polymer
• Formula: Polymer
• Model NO.: SDB10D-Z01
• EINECS: Polymer
• Material: Polyurethanes/PU
• Usage: Engineering Plastics
• Plastic Properties After Heated: Thermosetting Plastic
• Plastic Forming Method: Injection
• Color: Yellow
• Core Density: ≥60 Kg/M3
• Radial Compressive Strength: ≥0.3MPa
• Initial Thermal Conductivity(50°c): ≤0.033W/(M•K)
• Close Cell Content: ≥88%
• Water Absorption: ≤10%
• Appearance: Pale Yellow Liquid.
• Specific Gravity at 25°c: 1.10±0.10 g/cm3
• Viscosity at 25°c: 300±100 Cps
• Shelf Life: 12 Months
• Transport Package: Iron Drum
• Specification: 200kg
• Trademark: shunda
• Origin: China
• HS Code: 39072090
• Production Capacity: 100000tons

Product Description

DESCRIPTION
SDB10D is a kind of blend polyol used for pipe insulation system for city heating or cooling. When it combined with isocyanate(PM200) leads to the formation of rigid polyurethane foam by using PU injection foam equipment .The foam formed has the characteristics as following:

1. The thermal conductivity is low, which can meets the requirements of city heating and energy saving.
2. Service life of the foam is very long, over 30 years.
3. High temperature resistance and good dimensional stability of the foam, the highest temperature range is 140 ºC.

TYPICAL PHYSICAL PROPERTIES

Physical Properities	Test Method	Metric	Value
Core Density	GB/T 6343-2009	kg/m^3	≥60
Radial Compressive Strength	GB/T 8813-2008	MPa	≥0.3
Initial Thermal Conductivity(50°C)	GB/T 10294-2008	W/(m·K)	≤0.033
Close Cell Content	GB/T 10799-2008	%	≥88
Water Absorption	GB/T 8810-2005	%	≤10
Air bubbles	GB/T 29047	mm	1/3Insulation thickness.
Average cell size.	GB/T 29047	mm	≤0.5

Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.

Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information: