Easy Install, Cold Storage Construction Thermal Insulation Sandwich Panel

• Customization: Available
• Material: Polyurethanes/PU
• Usage: Engineering Plastics
• Model NO.: SDL3232
• Plastic Properties After Heated: Thermoplastic Plastics
• Plastic Forming Method: Reaction Injection Plastic
• Color: Yellow
• Cream Time: 9-15s
• Gel Time: 35-80s
• Rise Time: 70-180s
• Core Density: 30-50kg/M3
• Compressive Strength: 300-500cps
• Application: Building Insulation
• Transport Package: 220kg/Drum
• Specification: Two components
• Trademark: Shunda
• Origin: China
• HS Code: 39072090
• Production Capacity: 50000ton/Year
• Package Size: 60.00cm * 60.00cm * 90.00cm
• Package Gross Weight: 19.000kg

Product Description

SDL3232

CONTINUOUS SANDWICH PANEL RIGID PU FOAM

Product Description

SDL3232 is a kind of blend polyol used for the continuous line, color steel sandwich panel general flame retardant rigid PU foam. It is widely used for the production of cold storage sandwich panel, building roof panel, factory out wall panel, door panel and so on. It used together with isocyanate to make rigid PU foam of the color steel sandwich panel through PU foaming machine and laminating plant. The foam produced has the characteristics as following

Low ODP.
It has a good bonding effect with the steel.
The low thermal conductivity, low water absorption and good dimensional stability.. The long service life.

Product Parameters

Physical Properities                                                         Test Method Standard                 Metric               Value
Density	GBT 6343-2009	kg/m³	30-50
Compressive Strength	GBT 8813-2008	MPa	0.12-0.20
Initial Thermal Conductivity	GBT 10294-2008	W/(m·K)	0.018-0.024
Oxygen index	GBT 2406.2-2009	%	23.0±1
Dimensional Stability	GBT 8811-2008	%	0-2.0
Close Cell Content	GBT 10799-2008	%	90±5
Water Absorption	GBT 8810-2005	%	≤3

Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.

Additional Information

1. It is recommended to control the temperature during foaming,Including mold temperature, material temperature, environmental temperature and so on.
2. Suggest puting the finished panel not less than 20 ºC environment for at least 24h, Avoid occurrencing obvious thermal expansion cold shrink for environmental temperature changing too big.  

Packing Specification

220KGS/drum, blue paint or zinc coating drums (Drum Weight: 18-23kg)