WHOLE WATER SYSTEM BLEND POLYOL SDG2104
RIGID PU FOAM FOR PIPE INSULATION
PRODUCT INTRODUCTION
SDG2104 is a kind of blend polyol of whole water system used in pipe insulation. This kind of product use zero ozone depleting blowing agent (0 ODP), SDG2104 use CO2 as the blowing agent, which produced through the reaction of water and isocyanate. Every performance of SDG2104 finished foam products can meet the requirements of GB/T29047 standard.
The foam produced has the characteristics as following
1.Water blowing agent, environmental protection, zero ozone depleting blowing agent(0 ODP).
2.Excellent heat resistance, long service life.
3.Good thermal insulation performance, high compressive strength
TYPICAL PHYSICAL PROPERTIES
| Physical Properities |
Test Method |
Metric |
Value |
| Core Density |
GB/T 6343-2009 |
kg/m3 |
60up |
| Radial Compressive Strength |
GB/T 8813-2008 |
MPa |
0.35up |
| Initial Thermal Conductivity(50°C) |
GB/T 10294-2008 |
W/(m·K) |
≤0.033 |
| Close Cell Content |
GB/T 10799-2008 |
% |
≥90 |
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions. For our products, the data are not legally binding.
.
SAFETY PRECAUTIONS:
Direct contact with SD2102 type blend polyol can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken.
Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.).
Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed.
Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.
Shunda Company founded in year 1996, is a leading manufacturer of rigid PU foam blend polyol System material, our annual sales reached 50,000 MT in the past three years. We have four
Manufacturer plants in Yantai, Linyi, Dalian and Chang chun with totally more than 400 employees by now. For over 20 years development, Yantai Shunda Polyurethane Co., Ltd has grown up into a modern joint-stock enterprise, which has the research, development, production and operation for the series of rigid polyurethane foam production. We are also the largest global distributor of MDI series of Wanhua Chemical. Depending on our own strong R&D capability, professional purchasing team, quality control ability and full MDI series product supply, we could supply all series of PU raw material to the internal and abroad customers and undertake the
engineering of the insulation project.
Yantai Sanjiang Chemical Industry Materials Co., Ltd is established in 2010 by Shunda Group as its
International sale company, its mainly engaged in Blend polyol, Polyetherpolyol, flameretardants, PU catalysts, Polymeric MDI and other raw materials which are widely used for the insulation of wall and roof building, coldstorage, ship, sandwichpanel, refrigerators, freezers, pipelines, garage door and etc.
Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:
Audited Supplier 
){kind=link}