POLYMERIC PM400
WANNATE® PM-400
Application
WANNATE® PM-400 is high functionality, high viscosity isocyanate which has a functionality of 2.8~2.9. It can be used the production of rigid PU foam and polyisocyanurate foams; particularly fit for continuous production of laminated polyisocyanurate slabstock foams. WANNATE® PM-400 can improve cell homogeneity and dimensional stability of foams and the compressive strength vertical to the foaming direction. The flame retardancy of polyurethane and polyisocyanurate foams also shows some improvement.
Typical physical and chemical properties
| Item(s) |
Specification(s) |
| Appearance |
Brown Liquid |
| Viscosity at 25ºC, mPa• s |
350~500 |
| -NCO, %Wt |
30.5~32.0 |
| Specific gravity at 25ºC, g/cm3 |
1.220~1.250 |
| Acidity(HCI), % |
≤0.05 |
| Hydrolysable Chlorine, % |
≤0.2 |
Package(s)
210L iron drums, 250kg/drum
Storage(s)
Since WANNATE® PM-400 is a reactive chemical, reaction with atmospheric moisture happens easily and leads to the formation of insoluble ureas and carbon dioxide gas, which can result in pressure build-up in closed containers and viscosity increase of the product. Containers must therefore be absolutely dry and carefully sealed after congested with nitrogen.
Containers of WANNATE® PM-400 should be kept properly closed and stored indoors at ambient temperature (15~35ºC) in a well-ventilated area. Storage at low temperature (below 0ºC) may lead to some crystallization; this material must, therefore, be protected from frost. If crystallization does occur, the material should be heated to 70-80ºC to melt it out, and should then be thoroughly agitated before use.
Extended storage at temperatures above 50ºC is not recommended to prevent from the formation of insoluble solids and viscosity increase.
Shelf Life
Under recommended storage conditions, the shelf life of WANNATE® PM-400 is one year since the date of production.
Shunda Company founded in year 1996, is a leading manufacturer of rigid PU foam blend polyol System material, our annual sales reached 50,000 MT in the past three years. We have four
Manufacturer plants in Yantai, Linyi, Dalian and Chang chun with totally more than 400 employees by now. For over 20 years development, Yantai Shunda Polyurethane Co., Ltd has grown up into a modern joint-stock enterprise, which has the research, development, production and operation for the series of rigid polyurethane foam production. We are also the largest global distributor of MDI series of Wanhua Chemical. Depending on our own strong R&D capability, professional purchasing team, quality control ability and full MDI series product supply, we could supply all series of PU raw material to the internal and abroad customers and undertake the
engineering of the insulation project.
Yantai Sanjiang Chemical Industry Materials Co., Ltd is established in 2010 by Shunda Group as its
International sale company, its mainly engaged in Blend polyol, Polyetherpolyol, flameretardants, PU catalysts, Polymeric MDI and other raw materials which are widely used for the insulation of wall and roof building, coldstorage, ship, sandwichpanel, refrigerators, freezers, pipelines, garage door and etc.
Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:
Audited Supplier 
WANNATE® PM-400
){kind=link}