Rigid Blend Polyol \Spray Foam Material for Building Roof

• Material: Polyurethanes/PU
• Usage: Engineering Plastics
• Plastic Properties After Heated: Thermoplastic Plastics
• Plastic Forming Method: Blow Molding
• Color: White
• Core Density: 40
• Model NO.: SDA33D
• Viscosity: 300
• Shelf Life: 6 Months
• Water Absorption: 3
• Gel Time: 100-120s
• Rise Time: 160-200
• Physical Properities: 35~46kg/M3
• Application: Building
• Compressive Strength: 200~300kpa
• Model No.: Sda33D
• Transport Package: 220kg/Drum
• Specification: Two components
• Trademark: Shunda
• Origin: China
• HS Code: 39072090
• Production Capacity: 50000ton/Year

Product Description

Rigid PU Foam Blend Polyol for Building Roof Insulation

SD1332 building wall insulation system blend polyol is a kind of spray rigid PU foam blend polyol, specially used for the insulation of building roof. It used together with isocyanate(PM-200) to make rigid PU foam through PU spray machine. The foam produced has the characteristics as following:

1. The strong adhesive force, convenient construction and no seams.
2. The low thermal conductivity, low water absorption and good dimensional stability.
3. The long service life.                                                                                                                                                                                      TYPICAL PHYSICAL PROPERTIES

4. Physical Properities		Test Method	Metric	Value
   Core Density		GB/T 6343-2009	kg/m^3	45.3
   Compressive Strength		GB/T 8813-2008	kPa	264
   Tensile Strenght		GB/T 9641-88	kPa	136
   Oxygen index		GB/T 2406.2-2009	%	23.4
   Initial Thermal Conductivity		GB/T 10294-2008	W/(m·K)	0.022
   Close Cell Content		GB/T 10799-2008	%	≥88
   Water Absorption		GB/T 8810-2005	%	≤3
   Dimensional Stability (Foam made After 6 days)	-25ºC	GB/T 8811-2008	%	≤±1 ≤±1

   Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.
   
   
   PACKING SPECIFICATION
   220KGS/Drum, Blue paint or Zinc coating drums (Drum Weight: 18-23kg)
   STORAGE RECOMMENDATIONS  
   Direct contact with SD1232 type blend polyol can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken.
   Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.).
   Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed.
   
                                                                                         
   
   Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.
   
    

Shunda Company founded in year 1996, is a leading manufacturer of rigid PU foam blend polyol System material, our annual sales reached 50,000 MT in the past three years. We have four
Manufacturer plants in Yantai, Linyi, Dalian and Chang chun with totally more than 400 employees by now. For over 20 years development, Yantai Shunda Polyurethane Co., Ltd has grown up into a modern joint-stock enterprise, which has the research, development, production and operation for the series of rigid polyurethane foam production. We are also the largest global distributor of MDI series of Wanhua Chemical. Depending on our own strong R&D capability, professional purchasing team, quality control ability and full MDI series product supply, we could supply all series of PU raw material to the internal and abroad customers and undertake the
engineering of the insulation project.

Yantai Sanjiang Chemical Industry Materials Co., Ltd is established in 2010 by Shunda Group as its
International sale company, its mainly engaged in Blend polyol, Polyetherpolyol, flameretardants, PU catalysts, Polymeric MDI and other raw materials which are widely used for the insulation of wall and roof building, coldstorage, ship, sandwichpanel, refrigerators, freezers, pipelines, garage door and etc.





Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information: