Customization: | Available |
---|---|
Material: | Polyurethanes/PU |
Usage: | Engineering Plastics |
Still deciding? Get samples of $ !
Order Sample
|
Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
---|
Payment Methods: |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
---|---|
Support payments in USD |
Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
---|
Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
SDG2102 s a kind of blend polyol used for pipe insulation system for city heating or cooling. When it combined with isocyanate(PM200) leads to the formation of rigid polyurethane foam by using PU injection foam equipment .The foam formed has the characteristics as following:
The thermal conductivity is low, which can meets the requirements of city heating and energy saving
Service life of the foam is very long, over 30 years.
High temperature resistance and good dimensional stability of the foam, the highest temperature range is 140 ºC
Physical Properities Test Method Standard Metric Value | |||
Core Density | GB/T 6343-2009 | kg/m3 | ≥60 |
Radial Compressive Strength |
GB/T 8813-2008 | MPa | ≥0.3 |
Initial Thermal Conductivity(50°C ) |
GB/T 10294-2008 | W/(m·K) | ≤0.033 |
Close Cell Content | GB/T 10799-2008 | % | ≥88 |
Property Blend polyol Polymeric MDI | ||
Product Name | SDG2102 | PM200 |
Appearance | Light yellow liquid | Brown liquid |
Density( 25°C) | 1.10±0.10 g/cm3 | 1.22-1.25 g/cm3 |
Viscosity( 25°C) | 300±100 cps | 200±50 cps |
Shelf Life | 6 months | 12 months |
Before foaming,The ratio column of the two components must be checked,Moreover, The operator should reset the radio for a period of time
SDG2102 and Polymeric MDI should be controlled temperature, Prevented the summer temperature being too high, and heated in winter.
Exhaust before operation, and to avoid polyurethane foam escaped from cracks.
220KGS/drum, blue paint or zinc coating drums (Drum Weight: 18-23kg)
The blend polyol should be stored in the sealed container to avoid the absorption of water vapor. During the transportation, it should avoid serious shake and strong sunlight. It should be stored in ventilated place, avoiding light, water and fire. Recommended storage temperature is 15~25ºC
Direct contact with SDG2102 type blend polyol can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken.
Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.).
Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed.