Blend Polyol SD2401/SD2402 with Very Less Core of The Foam

• Customization: Available
• Material: Polyurethanes/PU
• Usage: Engineering Plastics
• Model NO.: SDJ2401/SDJ2402
• Plastic Properties After Heated: Thermoplastic Plastics
• Color: Yellow
• Cream Time: 2-4s
• Gel Time: 70-120s
• Rise Time: 90-180s
• Core Density: 38kg/M3
• Compressive Strength: 130 Cps
• Application: Refrigerator and Freezer
• Transport Package: 220kg/Drum
• Specification: Two components
• Trademark: shunda
• Origin: China
• HS Code: 39072090
• Production Capacity: 50000ton/Year
• Package Size: 60.00cm * 60.00cm * 90.00cm
• Package Gross Weight: 19.000kg

Product Description

Blend Polyol SD2401/SD2402
Home Appliances used Rigid PU Foam 

Product Description

SD2401/SD2402 is mainly used for thermal insulation layer of the refrigerator and freezer. SD2401 is designed for cyclopentane material as the physical blowing agent, while SD2402 is designed for 141b as the physical blowing agent. It used together with isocyanate(PM-200) to make rigid PU foam through PU injection foam machine. The foam produced has the characteristics as following:

1. Good flowing property
2. The pore in the core of the foam is very less. 
3. Low thermal conductivity and so on.

Product Parameters

 

Physical Properities	Metric	Value
Thermal Conductivity (Average Temperature 10ºC)	W/(m.K)	0.021	0.0195
Compressive Strength	KPa	130	110
Dimensional Stability	-30ºC 24h	1 1.5
	70ºC 24h
Core Density	kg/m^3	≤38	≤35

Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.

ADDITIONAL INFORMATION

1. Mold temperature should be controled in 35 to 40 ºC, Temperature of Polymeric and polyol should be controled in 20 to 25 ºC.
2. Off mold time should be within 10-40 minutes according the customer's needs.

PACKING SPECIFICATION
220KGS/drum, Blue paint or Binc coating drums (Drum Weight: 18-23kg)
 

Storage Recommendations

The blend polyol should be stored in the sealed container to avoid the absorption of water vapor. During the transportation, it should avoid serious shake and strong sunlight. It should be stored in ventilated place, avoiding light, water and fire.

Recommended storage temperature:  15~25ºC.
Shelf life: 12 months
 

Safety Precautions

Direct contact with SD2401/SD2402 type blend polyol can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken.

Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.).
Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed.

                                                                                       
Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.