Blend Polyol SDP1234
Water based Spray Rigid PU Foam
Product Description
SDP1234 is a kind of light, insulation, noise reduction material which used for the alternative solution for the traffic industry. The open cell flexible PU foam can be used to form a seamless airtight sealing layer inside the bus compartment, so that will effectively reduce the heat loss, noise and vibration, and greatly improve the comfort of passengers. SDP1234 type blend polyol foam has the characteristics as following:
- Light.
- The strong adhesive force, convenient construction and no seams.
- Open cell, excellent noise reduction performance.
- Good insulation and fireproof performance
Product Parameters
| Physical Properities |
Metric |
Value |
Test Method |
| Core Density |
kg/m3 |
<10 |
GB/T 6343-2009 |
| Initial Thermal Conductivity |
W/(m·K) |
<0.042 |
GB/T 10294-2008 |
| Flammability |
A-0 |
A-0 |
GB 8410-2006 |
| Odor test(80ºC) |
/ |
3.5 |
Q/ZK JS10-000-201302 |
| Ormaldehyde Emission |
mg/kg |
<10 |
VDA275:1994 |
| Fogging Test |
mg |
≤5 |
DIN75201:2011B |
| VOC(Benzene,Methylbenzene ,Imethyl,Benzene ,Phenylethane,Styrene) |
μg/g |
<10 |
VDA277:1995 |
| TVOC |
μgC/g |
<50 |
VDA277:1995 |
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.
Additional Information
- Maximum per pass thickness is 50mm,Spraying thicker can result in spontaneous combustion and poor overall spray foam quality
- Internal temperature of installed pass must be 25ºC before installing subsequent passes Maximum thickness during 24h period is 203mm(8inches)
- Like most of foam product,foam made by SDP1234is combustible,An thermal barrier must be installed in accordance with approved construction standards SDP1234
- The service temperature of the foam with SDP1234 is between -60~80ºC.
Packing Specification
220KGS/drum, blue paint or zinc coating drums (Drum Weight: 18-23kg)
Audited Supplier 
){kind=link}