Polyether Polyol Water Based Spray Rigid PU Foam Sda23f

• Material: Polyurethanes/PU
• Usage: Engineering Plastics
• Plastic Properties After Heated: Thermosetting Plastic
• Plastic Forming Method: Spray
• Color: Yellow
• Transport Package: Iron Drum
• Model NO.: SDA23F
• Specification: 220kg/Drum
• Trademark: shunda
• Origin: China
• HS Code: 39072090
• Production Capacity: 100000tons

Product Description

Blend  Polyol  SDA23F
Water based Spray Rigid PU Foam 

SDA23F is a kind of light, insulation, noise reduction material which used for the alternative solution for the traffic industry. The open cell flexible PU foam can be used to form a seamless airtight sealing layer inside the bus compartment, so that will effectively reduce the heat loss, noise and vibration, and greatly improve the comfort of passengers. SDA23F type blend polyol foam has the characteristics as following:
 

1. Light.
2. The strong adhesive force, convenient construction and no seams.
3. Open cell, excellent noise reduction performance.
4. Good insulation and fireproof performance

TYPICAL PHYSICAL PROPERTIES

Physical Properities	Metric	Value	Test Method
Core Density	kg/m^3	<10	GB/T 6343-2009
Initial Thermal Conductivity	W/(m·K)	<0.042	GB/T 10294-2008
Flammability	A-0	A-0	GB 8410-2006
Odor test(80ºC)	/	3.5	Q/ZK JS10-000-201302
Ormaldehyde Emission	mg/kg	<10	VDA275:1994
Fogging Test	mg	≤5	DIN75201:2011B
VOC(Benzene,Methylbenzene ,Imethyl,Benzene ,Phenylethane,Styrene)	μg/g	<10	VDA277:1995
TVOC	μgC/g	<50	VDA277:1995

ADDITIONAL INFORMATION

1. It is recommended to control the temperature during foaming,Including mold temperature, material temperature, environmental temperature and so on.
2. Suggest puting the finished panel not less than 20 ºC environment for at least 24h, Avoid occurrencing obvious thermal expansion cold shrink for environmental temperature changing too big.  

Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.
 

Shunda Company founded in year 1996, is a leading manufacturer of rigid PU foam blend polyol System material, our annual sales reached 50,000 MT in the past three years. We have four
Manufacturer plants in Yantai, Linyi, Dalian and Chang chun with totally more than 400 employees by now. For over 20 years development, Yantai Shunda Polyurethane Co., Ltd has grown up into a modern joint-stock enterprise, which has the research, development, production and operation for the series of rigid polyurethane foam production. We are also the largest global distributor of MDI series of Wanhua Chemical. Depending on our own strong R&D capability, professional purchasing team, quality control ability and full MDI series product supply, we could supply all series of PU raw material to the internal and abroad customers and undertake the
engineering of the insulation project.

Yantai Sanjiang Chemical Industry Materials Co., Ltd is established in 2010 by Shunda Group as its
International sale company, its mainly engaged in Blend polyol, Polyetherpolyol, flameretardants, PU catalysts, Polymeric MDI and other raw materials which are widely used for the insulation of wall and roof building, coldstorage, ship, sandwichpanel, refrigerators, freezers, pipelines, garage door and etc.





Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information: