• PU Foam Pipe Insulation Resin Material Polyol and Isocyanate Polyurethane Foam
  • PU Foam Pipe Insulation Resin Material Polyol and Isocyanate Polyurethane Foam
  • PU Foam Pipe Insulation Resin Material Polyol and Isocyanate Polyurethane Foam
  • PU Foam Pipe Insulation Resin Material Polyol and Isocyanate Polyurethane Foam
  • PU Foam Pipe Insulation Resin Material Polyol and Isocyanate Polyurethane Foam
  • PU Foam Pipe Insulation Resin Material Polyol and Isocyanate Polyurethane Foam

PU Foam Pipe Insulation Resin Material Polyol and Isocyanate Polyurethane Foam

CAS No.: Polymer
Formula: Polymer
EINECS: Polymer
Material: Polyurethanes/PU
Usage: Engineering Plastics
Plastic Properties After Heated: Thermosetting Plastic
Samples:
US$ 100/kg 1 kg(Min.Order)
| Request Sample
Customization:

Contact Supplier

Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
SDB10D-Z01
Plastic Forming Method
Injection
Color
Yellow
Core Density
≥60 Kg/M3
Radial Compressive Strength
≥0.3MPa
Initial Thermal Conductivity(50°c)
≤0.033W/(M•K)
Close Cell Content
≥88%
Water Absorption
≤10%
Appearance
Pale Yellow Liquid.
Specific Gravity at 25°c
1.10±0.10 g/cm3
Viscosity at 25°c
300±100 Cps
Shelf Life
12 Months
Transport Package
Iron Drum
Specification
200kg
Trademark
shunda
Origin
China
HS Code
39072090
Production Capacity
100000tons

Product Description

DESCRIPTION
SDB10D is a kind of blend polyol used for pipe insulation system for city heating or cooling. When it combined with isocyanate(PM200) leads to the formation of rigid polyurethane foam by using PU injection foam equipment .The foam formed has the characteristics as following:
  1. The thermal conductivity is low, which can meets the requirements of city heating and energy saving.
  2. Service life of the foam is very long, over 30 years.
  3. High temperature resistance and good dimensional stability of the foam, the highest temperature range is 140 ºC.
TYPICAL PHYSICAL PROPERTIES
Physical Properities Test Method Metric Value
Core Density GB/T 6343-2009 kg/m3 60 
Radial Compressive Strength GB/T 8813-2008 MPa 0.3
Initial Thermal Conductivity(50°C) GB/T 10294-2008 W/(m·K) 0.033
Close Cell Content GB/T 10799-2008 % 88
Water Absorption GB/T 8810-2005 % 10
Air bubbles GB/T 29047 mm 1/3Insulation thickness.
Average cell size. GB/T 29047 mm 0.5
Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions.For our products, the data are not legally binding.

Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:
 
 

PU Foam Pipe Insulation Resin Material Polyol and Isocyanate Polyurethane Foam
PU Foam Pipe Insulation Resin Material Polyol and Isocyanate Polyurethane Foam
PU Foam Pipe Insulation Resin Material Polyol and Isocyanate Polyurethane Foam
PU Foam Pipe Insulation Resin Material Polyol and Isocyanate Polyurethane Foam

Send your message to this supplier

*From:
*To:
avatar Ms. Yolanda zhang
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now