Rigid PU Foam :BLEND POLYOL SDP1237
Product Description
SDP1237 is a kind of blend polyol used for rigid PU foam spray, specially used for the insulation of building external wall. When it combined with isocyanate(PM200) leads to the formation of rigid polyurethane foam by using PU spray machine. The foam formed has the characteristics as following:
1. Zero ozone depleting blowing agent
2. The strong adhesive force, convenient construction and no seams.
3. The low thermal conductivity, low water absorption and good dimensional stability.
4. The long service life
| Physical Properities |
Test Method |
Metric |
Value |
| Initial Thermal Conductivity |
GB/T 10294-2008 |
W/(m·K) |
≤0.023 |
| Close Cell Content |
GB/T 10799-2008 |
% |
≥90 |
USAGE ATTENTIONS:
1.The thickness of one gun spray foam should not exceed 50 mm. If over 50mm, which may cause foam spontaneous combustion and poor foam performance.
2.It is suggested that spray next layer of the foam after the internal temperature of last spray foam blow 25ºC. And the maximum thickness spray during 24h period is 203mm(8inches).
3. Like most of foam product, foam made by SDP1237 is combustible. An thermal barrier must be installed in accordance with approved construction standards
PACKING SPECIFICATION
220KGS/Drum, Blue paint or Zinc coating drums (Drum Weight: 18-23kg)
STORAGE RECOMMENDATIONS
The blend polyol should be stored in the sealed container to avoid the absorption of water vapor. During the transportation, it should avoid serious shake and strong sunlight. It should be stored in ventilated place, avoiding light, water and fire. Recommended storage temperature is 15~25ºC.
SAFTY PRECAUTIONS
Direct contact with SDP1237 type blend polyol can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken. Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.). Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed.
Shunda Company founded in year 1996, is a leading manufacturer of rigid PU foam blend polyol System material, our annual sales reached 50,000 MT in the past three years. We have four
Manufacturer plants in Yantai, Linyi, Dalian and Chang chun with totally more than 400 employees by now. For over 20 years development, Yantai Shunda Polyurethane Co., Ltd has grown up into a modern joint-stock enterprise, which has the research, development, production and operation for the series of rigid polyurethane foam production. We are also the largest global distributor of MDI series of Wanhua Chemical. Depending on our own strong R&D capability, professional purchasing team, quality control ability and full MDI series product supply, we could supply all series of PU raw material to the internal and abroad customers and undertake the
engineering of the insulation project.
Yantai Sanjiang Chemical Industry Materials Co., Ltd is established in 2010 by Shunda Group as its
International sale company, its mainly engaged in Blend polyol, Polyetherpolyol, flameretardants, PU catalysts, Polymeric MDI and other raw materials which are widely used for the insulation of wall and roof building, coldstorage, ship, sandwichpanel, refrigerators, freezers, pipelines, garage door and etc.
Other unmentioned matters and TDS&MSDS.Please visit our official website shundapu.en.made-in-china.com
Or please contact us for information:
Audited Supplier 
){kind=link}
){kind=link}