Factory Price PU Raw Material for Pipe Insulation Injection Foam

• Customization: Available
• Highest Working Temperature: 25
• Core Density: 40
• Model NO.: sd2102
• Viscosity: 300
• Shelf Life: 6 Months
• Water Absorption: 3
• Density: 40
• Closed Cell Content: ≥90
• Color: Light Yellow to Brownish Yellow Transparent Liquid
• Transport Package: Drum
• Specification: 220kg/drum
• Trademark: Shunda
• Origin: China
• HS Code: 3907209000
• Production Capacity: 50000/Year

Product Description

BLEND POLYOL SD 2102
RIGID PU FOAM FOR PIPE INJECTION INSULATION

PRODUCT INTRODUCTION
SD2102 is a kind of blend polyol used for pipe insulation system for city heating or cooling. When it combined with isocyanate(PM200) leads to the formation of rigid polyurethane foam by using PU injection foam equipment .The foam formed has the characteristics as following:

1. The thermal conductivity is low, which can meets the requirements of city heating and energy saving.
2. Service life of the foam is very long, over 30 years.
3. High temperature resistance and good dimensional stability of the foam, the highest temperature range is 140 ºC.

TYPICAL PHYSICAL PROPERTIES

Physical Properities	Test Method	Metric	Value
Core Density	GB/T 6343-2009	kg/m^3	≥60
Radial Compressive Strength	GB/T 8813-2008	MPa	≥0.3
Initial Thermal Conductivity(50°C)	GB/T 10294-2008	W/(m·K)	≤0.033
Close Cell Content	GB/T 10799-2008	%	≥88
Water Absorption	GB/T 8810-2005	%	≤10
Air Bubbles	GB/T 29047	mm	1/3Insulation thickness.
Average Cell Size.	GB/T 29047	mm	≤0.5

Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions. For our products, the data are not legally binding.
STORAGE RECOMMENDATIONS:
The blend polyol should be stored in the sealed container to avoid the absorption of water vapor. During the transportation, it should avoid serious shake and strong sunlight. It should be stored in ventilated place, avoiding light, water and fire.
Recommended storage temperature: 15~25ºC.
Shelf life: 12 months

.

SAFETY PRECAUTIONS:
Direct contact with SD2102 type blend polyol can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken.
Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.).
Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed.
                                                                                       
Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.