Cold Storage Insulation Spray Rigid PU Foam Blend Polyol

• Customization: Available
• Feature: Biodegradable
• Material: Polyurethanes/PU
• Model NO.: SDP1133
• Usage: General Plastics, Engineering Plastics
• Plastic Properties After Heated: Thermosetting Plastic
• Plastic Forming Method: Reaction Injection Plastic
• Color: Brown
• Transport Package: Iron Drum
• Specification: 220kg/Drum
• Trademark: Shunda
• Origin: China
• HS Code: 39072090
• Production Capacity: 50000ton/Year
• Package Size: 60.00cm * 60.00cm * 90.00cm
• Package Gross Weight: 19.000kg

Product Description

Product Description

SDP1133 cold storage insulation system blend polyol is a kind of spray rigid PU foam blend polyol, specially used for the insulation of the wall of storage insulation. It used together with isocyanate(PM-200) to make rigid PU foam through PU spray machine. The foam produced has the characteristics as following:
The strong adhesive force, convenient construction and no seams.
The low thermal conductivity, low water absorption and good dimensional stability.
The long service life.

Product Parameters

 

Physical Properities                                                                                                      Test Method Standard                                         Metric                            Value
Core Density		GB/T 6343-2009	kg/m^3	38.3
Compressive Strength		GB/T 8813-2008	kPa	264
Tensile Strength		GB/T 9641-88	kPa	136
Oxygen index		GB/T 2406.2-2009	%	23.4
Initial Thermal Conductivity		GB/T 10294-2008	W/(m·K)	0.023
Close Cell Content		GB/T 10799-2008	%	≥88
Water Absorption		GB/T 8810-2005	%	≤3
Dimensional Stability (Foam made After 6 days)	-25ºC 70ºC	GB/T 8811-2008	%	≤±1
				≤±1

Usage Attentions

The thickness of one gun spray foam should not exceed 50 mm. If over 50mm, which may cause foam charring or spontaneous combustion and poor foam performance.
It is suggested that spray next layer of the foam after the internal temperature of last spray foam blow 25ºC. And the maximum thickness spray during 24h period is 203mm(8inches).
Like most of foam product, foam made by SDP1133 is combustible. An thermal barrier must be installed in accordance with approved construction standards.
The service temperature of the foam with SDP1133 is between -60~80ºC.

Storage Recommendations

The blend polyol should be stored in the sealed container to avoid the absorption of water vapor. During the transportation, it should avoid serious shake and strong sunlight. It should be stored in ventilated place, avoiding light, water and fire. Recommended storage temperature is 15~25ºC.

Safety Precautions

Direct contact with SDP1133 type blend polyol can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken.
Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.).
Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed.