Rigid PU Foam for Discontinuous Sandwich Panel Raw Material

• CAS No.: 9003-11-6
• Material: Polyurethanes/PU
• Usage: General Plastics
• Plastic Properties After Heated: Thermoplastic Plastics
• Plastic Forming Method: Blow Molding
• Color: White
• Core Density: 40
• Appearance: Liquid
• Viscosity: 300
• Shelf Life: 6 Months
• Water Absorption: 3
• Transport Package: Drum
• Specification: 220kg/drum
• Trademark: Shunda
• Origin: China
• HS Code: 3907209000
• Production Capacity: 50000/Year

Product Description

BLEND POLYOL SD 2232
RIGID PU FOAM FOR DISCONTINUOUS SANDWICH PANEL
PRODUCT INTRODUCTION
SD2232 is a kind of blend polyol used for discontinuous sandwich panel designed with HCFC-141B system. SD2232 type sandwich panel is a kind of thermal insulation panel which used for cold storage, using rigid PU foam as core layer, metal material or other materials as the surface of the panels. The sandwich panel can cover different kinds of materials such as color steel, aluminum alloy, galvanized steel, stainless steel and aluminum plated zinc plat. The SD2232 type foam has the following characteristics:

1. The production process is relatively simple, less equipment investment
2. The bonding of rigid PU foam and steel material is very good.
3. Good flame retardant performance, the index of oxygen can reach up 24%.
4. Easy install, cold storage construction is very convenient.
5. Cold storage panel can be used repeatedly.

TYPICAL PHYSICAL PROPERTIES

Physical Properities	Metric	Value	Test Method
Core Density	kg/m^3	32--42	GB/T 6343-2009
Initial Thermal Conductivity	W/(m·K)	<0.024	GB/T 10294-2008
Combustion Performance	Grade	Level 2	QB/T 3806
Compressive Strength	KPa	≥150	GB/T  8813
Water Absorption	%	≤4	GB/T  8810
Dimensional Stability	70ºC  48h	≤4	GB/T  8811
	-30ºC  48h	≤4	GB/T  8811

Importance: The above mentioned are typical test values, and the specific data may vary slightly due to environmental conditions. For our products, the data are not legally binding.
 

PACKING SPECIFICATION
220KGS/drum, blue paint or zinc coating drums (Drum Weight: 18-23kg)

STORAGE RECOMMENDATIONS:
The blend polyol should be stored in the sealed container to avoid the absorption of water vapor. During the transportation, it should avoid serious shake and strong sunlight. It should be stored in ventilated place, avoiding light, water and fire.
Recommended storage temperature is 15~25ºC.

SAFETY PRECAUTIONS:
Direct contact with SD2702 type blend polyol can lead to moderate eye irritation and mild skin irritation, which can cause skin allergies. Repeated inhalation of high concentration of volatile gas will cause respiratory allergy, and should be treated immediately. Anti- inflammatory and anti-allergic treatment measures should be taken.
Please be careful in the operation to prevent contact with the skin and splash into the eye, please wear the necessary protective equipment (gloves, protective goggles, working clothes, etc.).
Once splashed on the skin or the eye, rinse with water immediately for at least 15 minutes, and the skin is washed with soapy water. Please seek medical treatment immediately after swallowed.

                                                                                      
Notice: This product specification is intended to be used by Shunda Polyurethane Company in order to show sincerity to our customers, while it is not covered by law as a guarantee. Customers can adjust according to the actual operating conditions. If you have any questions, please call our company and we will serve you wholeheartedly.